Kverneland 2316M, Техническое и сервисное руководство

Страница: 24 / 60

Working in the field
Cutting unit guard
Working in the field
Spring catch when hitting an
obstacle
The spring catch keeps the
machine's cutting unit in position
in relation to the tractor. If the
machine meets an obstacle, the
catch is released, and the
machine's cutting unit will swing
behind. Carry out the following:
•
Stop the tractor immediately.
• Remove the obstacle.
• Reverse the tractor slightly
and check that the machine's
cutting unit returns to its
original position and the
spring catch is reactivated.
The guard around the cutting unit
can be placed in 2 positions.
Placing the guard in the top
position improves the cutting
quality on hilly ground.
•
Pull the tarpaulin up at both
ends of the cutting unit so the
frame is visible.
• Raise the frame up and
remove the bolt in both ends
of the cutting unit.
• Fit and tighten the bolt in the
top hole in the bracket in both
ends of the cutting unit.
• Pull the tarpaulin down over
the frame The
3.2 Working in the field
24