Kverneland 2316M, Техническое и сервисное руководство

Страница: 15 / 60

Preparation
Category 1 model 1017 only
Preparation
Linkage pins
Preparation
Linkage pins
The machine is fitted with linkage
pins which can be turned if
required, depending on the size
of the tractor and the model. The
linkage pins are changed in the
following way:
• Loosen the bolts on the linkage
pins.
• Adjust or turn the linkage pins.
• Fit the linkage pins.
• Tighten and secure the bolts.
• A 1500 mm. (59”) as minimum
B 684 mm. (27”)
C 926 mm. (36”)
• LH side the short linkage pin
• RH side the long linkage pin
• Model 117 is equipped with
category 1 linkage pins. If a
bushing is used, category 2
linkage pins may also be
used.
• Category 1 linkage pins are
available as extra equipment
for model 122 and 124.
• A 1500 mm (59”)
B 825 mm. (32 ½”)
C 998 mm (39”)
• LH side the short linkage pin
• RH side the long linkage pin
Preparation
Category 2
2.1 Attachment
15