Kurzweil K2661, Справочник музыканта

Страница: 162 / 500

10-80
KDFX Reference
KDFX Algorithm Specifications
of both effects determined by the Mix parameters, and the input dry signal. Negative Wet/Dry values
polarity invert the summed wet signal relative to dry.
Figure 10-27 Chor<>4Tap with A->B cfg set to Ch->4T and 4T->Ch
Bi-directional Routing
Mix Effect Adjusts the amount of each effect is mixed together as the algorithm wet signal. Negative
values polarity invert that particular signal.
A->B cfg This parameter controls the order of the effects routing. The output of effect A is wired
into the input of effect B. So, when set to Ch->4T for example, effect A is chorus, and effect
B is 4-tap. This is used in conjunction with the A/Dry->B parameter.
A/Dry->B This parameter controls how much of the A effect is mixed with dry and fed into the B
effect. A and B are determined by the A->B cfg parameter. This works like a wet/dry mix,
where 0% is completely dry and 100% is effect A only.
Individual Effect Components
Configurable Chorus and Flange
The con fi gurable chorus and fl ange have 2 moving delay taps per channel. Parameters associated with
chorus control begin with “Ch” in the parameter name, and those associated with fl ange begin with Fl.
General descriptions of chorus and fl ange functionality can be found in the Chorus or Flange sections.
Wet/Dry -100 to 100 % Out Gain Off; -79.0 to 24.0 dB
Mix Effect -100 to 100 %
Mix Effect -100 to 100 %
A->B cfg EffectA->EffectB A/Dry->B 0 to 100%
2-Tap
Chorus
4-Tap
Delay
Blend
Blend
Input
Output
Mix 4 Tap
Mix Chorus
Out Gain
A/Dry->B
Wet/Dry
Configured as 4T -> Ch
Configured as Ch -> 4T
4-Tap
Delay
Input
Blend
2-Tap
Chorus
A/Dry->B
Mix 4 Tap
Mix Chorus
Blend
Wet/Dry
Out Gain
Output