Kurtz Ersa HR 550 XL, Перевод оригинального руководства по эксплуатации

Страница: 128 / 157

7 | Tutorial – Soldering or desoldering a component
Task 2 “Desoldering”
7.8 Task 2 “Desoldering”
CAUTION
Risk of burning due to heated machine parts and PCB!
All heated machine parts as well as the surrounding housing parts and product sup-
port frame, the circuit board and the components become hot even during warm-up
to the process temperature [Tinit]!
Parts are particularly hot during the soldering process! After the soldering process,
wait until the device and the PCB have cooled down and reached non-hazardous tem-
peratures!
NOTE
Use the soldering fume extraction system!
Solder fumes are hazardous to health. For this reason, a soldering fume extraction sys-
tem should always be used. As regards the type of soldering fume extraction system,
we recommend using the Ersa “Easy Arm” with prefilter, HEPA, particle filter and ac-
tivated carbon filter. The device is equipped with a suitable connection for the solder-
ing fume extraction system. The soldering fume extraction system prevents the device
from accumulating dirt quickly.
The desoldering process is performed.
Alignment Desoldering Alignment Release Inspection Provide Inspection Soldering Complete
Chart Information
Chart Show Value Colour
Setpoint curve
TC1
TC2
IR top
IRS
RPC camera light intensity
Auto exposure
Release
Back Next
Chart information
– Column [Show]: display/hide the measuring curves.
– Column [Colour]: colour of the measuring curve. Click the coloured square to
see all available colours.
Ersa GmbH Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1 128 / 157