Kurtz Ersa HR 550 XL, Перевод оригинального руководства по эксплуатации

Страница: 106 / 157

6 | Function description
The [Management] tabulator with three dialog windows
Style
Rework Archive User administration Profile management Administration
HRSoft 2 options
Graph options
Device options
Back Next
Preparation Green Images Red Images Finished
a) The position laser is on. Clamp the black plate in the PCB holder in such a way
that the laser beam is in the middle. If necessary, move the bottom heating
with the joystick on the control unit. Keep the track clear, risk of collision!
Press the switch to turn on/off slow travel mode with the joystick. When it is
switched on, the FINE DRIVE indicator lamp will light up. There are two motion
modes in Fine Drive: (1) Continuous slow motion when fully pressing the joy-
stick sideways. (2) Fine motion in small steps by gently pressing the joystick
sideways.
b) Use the laser with its printed side facing down to place the round focusing
small plate exactly in the middle of the black plate.
c) Go on to the next work step. This can be done either by pressing the green illu-
minated button on the control unit, or by clicking on the [Next] button at the
top of the window.
d) Pull out the Visionbox.
Ersa GmbH Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1 106 / 157