Kuppersbusch GMS9751.0E, Инструкция по использованию и установке

Страница: 47 / 80

EN 47
The gas-tubes must be installed in such a
way that these cannot be damaged by the
heat, generated by the appliance itself,
when it is in use. Particularly the gas-tubes
and gas-tap may not get in contact with hot
combustion gasses.
The gas-hose and connection cable may not
get in contact with parts of the appliance
which might get hot, because otherwise
these could get damaged.
Flexible connections must be placed in
such a way, that they cannot get in contact
with moving parts of the kitchen, for
example hinges, drawers or doors. Also, the
connection may not be exposed to mecha-
nical tensions.
Finally, check if the gas connections are air-
tight so there is no gas leakage.
This appliance has a R½ 90° gas connecti-
on.
The GMS9751.0E application is suitable for
natural and bottled gas. This appliance
meets the EN 30-1-1:2010 requirements.
After production, this appliance was adjus-
ted to natural gas [see type plate for speci-
fication]. For adjustment to use with liquid
gas, like butane and propane, suitable gas
nozzles can be supplied optionally. Consult
your dealer, supplier or the Küppersbusch
service department. The adjustment to ano-
ther gas type is explained in the following
chapter.
power/consumption natural gas G25/25 natural gas G20/20 LPG G30/30
max
kW
min
kW
max
m
3
/h
max
kW
min
kW
max
m
3
/h
max
kW
min
kW
max
m
3
/h
wok burner 5.0 0.31 0.556 5.0 0.36 0.486 5.0 0.3 0.149
power burner 3.0 0.62 0.315 3.0 0.67 0.283 2.7 0.6 0.073
standard burner 1.75 0.39 0.182 1.75 0.38 0.167 1.75 0.4 0.050
simmer burner 1.0 0.3 0.105 1.0 0.26 0.094 1.0 0.3 0.029