Kuka KUKA.PLC mxAutomation Logix 1.0, Руководство пользователя

Страница: 83 / 123

83 / 123 Issued: 13.08.2012 Version: KST PLC mxAutomation Logix 1.0 V1 en (PDF)
7 Programming
Memory
Inputs
Fig. 7-46: Function block KRC_JogLinearRelative
Parameter Type Description
KRC_AxisGroup
RefArr AXIS_GROUP_
REF_ARR Reference to the internal structure of the axis group
Parameter Type Description
Position E6POS Coordinates of the Cartesian end position
( >>> "E6POS" Page 26)
The data structure E6POS contains all components of
the end position (= position of the TCP relative to the ori-
gin of the selected coordinate system).
CoordinateSys-
tem COORDSYS Coordinate system to which the Cartesian coordinates of
the end position refer
( >>> "COORDSYS" Page 26)
AxisGroupIdx INT Index of axis group
ExecuteCmd BOOL Starts/buffers the motion in the case of a rising edge of
the signal.
Velocity INT Velocity
 0 … 100%
Refers to the maximum value specified in the machine
data. The maximum value depends on the robot type and
the selected operating mode.
Default:
0%
(= velocity is not changed)