Kuka KUKA.PLC mxAutomation Logix 1.0, Руководство пользователя

Страница: 42 / 123

42 / 123
Issued: 13.08.2012 Version: KST PLC mxAutomation Logix 1.0 V1 en (PDF)
KUKA.PLC mxAutomation Logix 1.0
Memory
Inputs
Outputs
7.6.14 Reading an analog input
Description
The function block KRC_ReadAnalogInput polls and reads an analog input of
the robot controller. This function is executed in the Submit interpreter.
Parameter Type Description
KRC_AxisGroup
RefArr AXIS_GROUP_
REF_ARR Reference to the internal structure of the axis group
Parameter Type Description
AxisGroupIdx INT Index of axis group
ExecuteCmd BOOL The statement is executed in the case of a rising edge of the
signal.
Number INT Number of the digital output
 1 … 2,048
Note
: It must be ensured that no outputs are used that are
already assigned by the system. Example: $OUT[1025] is
always TRUE.
Value BOOL Value of the digital output
Pulse REAL Length of the pulse
 0.0 s
No pulse active
 0.1 … 3.0 s
Pulse interval = 0.1 s; pulse durations outside this range
of values trigger a program stop.
Continue BOOL TRUE = output written in advance run
BufferMode INT Mode in which the statement is executed
 0
: DIRECT
 1
: ABORTING
 2
: BUFFERED
( >>> "BufferMode" Page 27)
Parameter Type Description
ErrorID DINT Error number
Busy BOOL TRUE = statement is currently being trans-
ferred or has already been transferred
Done BOOL TRUE = statement has been executed
Aborted BOOL TRUE = statement was aborted before it was
processed in the advance run
Error BOOL TRUE = error in function block