8. - Instructions for work
SR600 GII
37
7N037CUS_B
Wheel Rake
8.5
Adjusting transport wheel angle
Transport wheels angled outward or at different
angles may cause the rake to pull unevenly across
the field.
Follow these steps if the rake pulls to the left or to
the right during transportation or operation.
8.5.1 Measure wheel angle
Off-set tandem axles
In the transport position, measure the distance
between the tires. Measurement
A
is the distance
from center to center at the rear of the rear wheels.
Take the measurement at the height of the center of
the hub cap.
When taking the same measurement at the front of
front tires, the distance should be A + 17
1/2
" to 18"
(A + 445 mm to 457 mm)
Before adjusting, maintaining or repairing
the machine, perform the safety shutdown
procedure.
A
A + 17
1/2
” to 18”
(A + 445mm to 457mm)
