4. - Safety
SR600 GII
7
7N037CUS_B
Wheel Rake
4.2
Safety instructions
Read and follow the safety instructions
Before using the machine, carefully read all the
safety instructions in this manual and the warnings
placed on the machine. Failure to follow the
instructions contained in this manual could result in
product or property damage, severe personal injury,
or death. All applicable safety procedures, codes
and requirements of any federal, provincial, state
and local agencies, as well as safe working
practices and good judgment, must be used by
personnel when assembling, servicing, adjusting or
operating this equipment.
Before starting work, the operator must be familiar
with all machine controls, handling devices and their
functions. It is too late to learn once work has been
started!
Never let anyone operate the machine who is not
trained to do so.
Should you have any difficulties in understanding
any parts of this manual, please contact your KUHN
dealer.
Safety shutdown procedure
Before adjusting, maintaining or repairing the
machine, depressurize hydraulics, turn off the
engine, remove ignition key and wait until all moving
parts have come to a complete stop.
Introduction
The machine must only be operated, maintained and repaired by qualified persons who are familiar with
the machines' operation and understand safety regulations and procedures for preventing accidents.
The operator must follow the safety instructions in this manual and in the warnings posted on the machine.
The operator is also obliged to respect current legislation concerning accident prevention, work safety and
public traffic circulation.
The intended use of the machine includes following all operation, maintenance and repair
recommendations given by the manufacturer, and using only genuine spare parts, equipment and
accessories, as recommended by the manufacturer.
The manufacturer is not held liable for any damage resulting from machine applications other than those
specified by the manufacturer. Any use other than the designated operation is at the risk and responsibility
of the operator.
The manufacturer is not held liable for any damage or accident resulting from machine modifications carried
out by the operator himself or by a third party without previous written agreement from the manufacturer.
