SR600 GII
12
4. - Safety
7N037CUS_B
Wheel Rake
Precautions for machine use
After each use, check the cutting tools (disks,
knives) and their attachment hardware in
accordance with the instructions given in the
present manual. Immediately replace any worn,
damaged or missing cutting tool or element. To do
this, use the tool outfit supplied with the machine.
For your safety, only use genuine KUHN parts !
Regularly check the condition of the protection
covers. Immediately replace any worn, damaged, or
missing cover. Before engaging the PTO, rest the
cutterbar on the ground. Make sure all the guards
are in place. Keep all persons and animals away
from the danger zone.
Stay a safe distance from the machine when the
cutting tools are in movement.
Never work in reverse.
After disengaging the PTO drive, cuttings tools can
continue rotating for some time. Stay away from the
machine until all moving parts have come to a
complete standstill.
If the machine hits an obstacle, disengage the PTO
drive, stop the tractor engine, remove the ignition
key and wait for all moving parts to come to a
complete standstill. Check the entire machine for
any damage before resuming work.
Precautions during maneuvers
When moving the machine from the transport
position to the working position and vice versa,
make sure that nobody is within the machine
pivoting area.
Safety decals
Safety warnings are placed in safety decal form on
various parts of the machine. They are there to warn
you of potential dangers and to tell you how to avoid
accidents.
Always keep the safety decals clean and readable,
and replace them when they are worn, damaged,
missing or illegible.
