KUHN FC244 Скачать руководство пользователя

Страница: 20 / 156

FC244/D/-FF/D-FF

4. - Safety

KN329CGB_A

Mower conditioner

4.2.7 Maximum speed

Always keep to the legal speed limit for driving a
tractor-machine assembly on public roads.

4.2.8 Precautions when coupling

- Before attaching the machine, make sure that it

cannot accidentally start moving (chock the
wheels) and that the parking stand is in the right
position.

- The machine must only be attached to the hitch

points provided for this purpose.

- Do not stand between the machine lower hitching

points or between the tractor lower hitching points
during coupling maneuvers.

- Never stand between the tractor and the machine

when operating the three point linkage.

- Do not stand between the machine and the tractor

or on the machine without having first applied the
tractor parking brake and placed the gearbox in the
neutral position.

Содержание FC244





























































































































































Результаты поиска

Содержание FC244

Отзывы:

Похожие инструкции для FC244

Бренды по названию

Популярные бренды

KUHN FC244, Руководство оператора

Результаты поиска

Содержание FC244

Отзывы:

Похожие инструкции для FC244

Бренды по названию

Популярные бренды