Kubota Z751KWi, Руководство оператора

Страница: 77 / 102

8. Start the engine and check for oil leakage. Recheck
the oil level before placing the engine into service.
Stop the engine, correct any leakage, and allow 1
minute for the oil to drain down, then recheck the
level on the dipstick.
NOTE :
• To prevent extensive engine wear or
damage, always maintain the proper oil level
in the crankcase. Never operate the engine
with the oil level below the [ADD] or [L] mark
or above the [FULL] or [F] mark on the
dipstick.
2. Replacing the fuel filter
Consult your local KUBOTA Dealer for this service.
EVERY 250 HOURS
1. Replacing the air cleaner outer
element
(See Checking the air cleaner outer element on page
64.)
2. Checking the air cleaner inner
element
(See Checking the air cleaner outer element on page
64.)
EVERY 300 HOURS
1. Cleaning the combustion chamber
If you do not have the proper tools and/or are not
mechanically proficient, consult your local KUBOTA
Dealer for this service.
2. Cleaning and adjusting valve seat
and clearance
If you do not have the proper tools and/or are not
mechanically proficient, consult your local KUBOTA
Dealer for this service.
EVERY 500 HOURS AFTER 300
HOURS
1. Replacing the transaxle oil filter
WARNING
To avoid serious injury or death:
• Park the machine on a firm and level surface.
• Apply the parking brake.
• Be sure to stop the engine and remove the key
before changing or checking the oil.
• Allow the transmission case to cool down
sufficiently, as oil can be hot and may cause
burns.
1. Clean any loose debris from around the oil drain
plug, oil filter, expansion tank cap, and breather port
plug.
2. Place an oil drain pan (8 qt. capacity minimum)
beneath the oil drain plug. Remove the oil drain
plug and washer and allow used oil to drain
completely.
NOTE :
• Remove the expansion tank cap to speed up
the draining process.
3. Remove the oil filter.
PERIODIC SERVICE EVERY 200 HOURS
72
Z751KWi,Z781KWi,Z781KWTi