Kubota Z751KWi Скачать руководство пользователя страница 54

Страница: 54 / 102

6. Push or pull the motion control levers to move

forward or rearward.

IMPORTANT :

• Never attempt to move the machine with the

parking brake “ON”.

NOTE :

• Keep the engine running at full throttle for

best results. Control the travel speed with
the motion control levers.

• During heavy duty use, operate the machine

at a slower ground speed or go over the area
twice.

• Keep the mower deck in the raised position

when the mower is disengaged.

• The mower will not cut cleanly if the ground

speed is too high or if the blade speed drops
due to an overload.

• If debris builds up on the grass screen or

other  cooling  air  intake  areas,  stop  the
engine and clean them. Operating the engine
with  blocked  or  dirty  air  intake  and  cooling
areas  causes  engine  damage  due  to
overheating.

OPERATING THE MOWER

OPERATING THE MOWER

Z751KWi,Z781KWi,Z781KWTi

Содержание Z751KWi







































































































Результаты поиска

Содержание Z751KWi

Отзывы:

Похожие инструкции для Z751KWi

Бренды по названию

Популярные бренды

Kubota Z751KWi, Руководство оператора

Результаты поиска

Содержание Z751KWi

Отзывы:

Похожие инструкции для Z751KWi

Бренды по названию

Популярные бренды