Kubota Z751KWi, Руководство оператора

Страница: 55 / 102

TIRES AND WHEELS
TIRES
WARNING
To avoid serious injury or death:
• Do not attempt to mount a tire. This should be
done by a qualified person with the proper
equipment.
• Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the operator's manual.
• The inflation pressure in the front tires rises
quickly when using compressed air.
• Never operate the machine with a loose rim,
wheel, or axle.
• Whenever bolts are loosened, retighten to the
specified torque.
• Check all the bolts frequently and keep them
tightened.
1. Inflation pressure
Even though the inflation pressure is factory-set to the
prescribed level, it naturally drops slowly in the course
of time. Therefore, check it everyday and inflate as
necessary.
Z751KWi, Z781KWi
Tire sizes
Recommended inflation
pressure
Front
13 x 6.5 - 6, (non flat)
smooth
-
Rear 24 x 9.5 - 14, (4PR) turf
83 kPa
0.84 kgf/cm
2
12 psi
Z781KWTi
Tire sizes
Recommended inflation
pressure
Front
13 x 6.5 - 6, (non flat)
smooth
-
Rear 24 x 12 - 14, (4PR) turf
83 kPa
0.84 kgf/cm
2
12 psi
(1) Ground (A) “INSUFFICIENT”
(B) “NORMAL”
(C) “EXCESSIVE”
WHEELS
IMPORTANT :
• When refitting a wheel, tighten the wheel bolt to
the following torques then recheck after
traveling 200 m (200 yards), changing directions
several times.
Rear
(1) 108.5 to 130.2 N ⋅ m
80 to 96 lbf ⋅ ft
11.1 to 13.3 kgf ⋅ m
When using wheels with beveled or tapered holes, use
tapered wheel nuts.
1. Removing the front caster wheels
WARNING
To avoid serious injury or death:
TIRES AND WHEELS TIRES
50
Z751KWi,Z781KWi,Z781KWTi