Kubota Z751KWi, Руководство оператора

Страница: 52 / 102

(1) Mower lock lever (A) “LOCK”
(B) “UNLOCK”
2. To set the cutting height, keep depressing the
mower lift pedal to raise mower deck to the top
position. Make sure that the mower lock lever is in
unlock position. Adjust the cutting height control dial
to desired height.
3. Use the higher settings for mowing in a rough area
or when mowing tall grass. Lower settings should
be used only for smooth lawns where short grass is
desired.
(1) Cutting height control dial
(2) Mower lift pedal
4. Lower the mower deck by releasing the mower lift
pedal. This lowers the mower deck from the “TOP”
position to the “OPERATING” position.
5. Adjust the anti-scalp rollers' height as
recommended below for normal operating
condition. To minimize gouging and roller damage
or wear, the anti-scalp rollers will maintain the
ground clearance of 6 mm (0.25 in.).
IMPORTANT :
• Never allow the rollers to contact the ground
continuously as premature roller wear may
develop if set incorrectly.
• Anti-scalp rollers must maintain a minimum
clearance of 6 mm (0.25 in.) to the ground.
Bolt setting
RCK48P, RCK54P
(1) Anti-scalp roller (front, bolt shift type)
RCK60P
(1) Anti-scalp roller (front, bolt shift type)
2. Cutting height reference chart
• Set the position for a recommended ground
clearance of 19 mm (0.75 in.).
ADJUSTING THE CUTTING HEIGHT OPERATING THE MOWER
Z751KWi,Z781KWi,Z781KWTi
47