Kubota Z751KWi, Руководство оператора

Страница: 44 / 102

2. Raising the ROPS to the upright
position
1. Remove both snap pins and lock pins.
(1) Lock pin
(2) Snap pin
2. Raise the ROPS to the upright position.
CAUTION
To avoid personal injury:
• Hold the ROPS tightly with both hands and
raise the ROPS slowly and carefully.
3. Align the lock pin holes, insert both lock pins and
secure them with the snap pins. Do not use your
fingers to align the holes.
4. Tighten the knob bolts slightly.
CAUTION
To avoid personal injury:
• Make sure that both lock pins are properly
installed as soon as the ROPS is in the
upright position and secured with the snap
pins.
(1) Lock pin
(2) Snap pin
(3) Knob bolt
3. Adjusting the foldable ROPS
1. Adjust the free fall of the ROPS upper frame
regularly.
2. If you feel less friction when folding the ROPS,
tighten the nut (1) until you feel the right friction
when moving it. Then replace the snap pin.
(1) Nut
STARTING THE MACHINE
WARNING
To avoid serious injury or death:
• Read and understand the safe operation
section.
• Read and understand the safety labels located
on the machine.
• To avoid the danger of exhaust fume poisoning,
do not operate the engine indoors without
proper ventilation.
• Never start the engine while standing on the
ground. Start the engine only from the
operator's seat.
1. Adjust the operator's position and apply the seat
belt.
• Operator's seat on page 40
• Seat belt on page 40
2. Start the engine.
See OPERATING THE ENGINE on page 28.
3. Raise the implement.
• Mower lift pedal on page 40
4. Accelerate the engine.
• Throttle dial on page 29
5. Unlock the parking brake.
• Parking brake pedal on page 41
6. Operate the machine.
• Motion control lever on page 42
• Stop position of the motion control lever on
page 42
• Operating position of the motion control lever on
page 42
OPERATING THE FOLDABLE ROPS OPERATING THE MACHINE
Z751KWi,Z781KWi,Z781KWTi
39