KTR-STOP
®
M-xxx B-xx-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
445102 EN
7 of 22
3
Please observe protection
note ISO 16016.
Drawn:
2020-03-25 Shg/Wie
Replacing:
KTR-N dated 2019-08-26
Verified:
2020-03-25 Shg
Replaced by:
Component assembly 1: Housing with components
Compo-
nent
Quantity
Description
Illustration 4: Housing with single parts
1.1
1
Housing
1.2
1
Brake piston
1.3
1
Scraper
1.4
1
Gasket
1.5
1
Gasket
1.6
1
Set of disk springs
1.7
1
Setting nut
1.8
1
Centering pin
1.9
1
O-ring
1.10
1
Scraper
1.11
1
Gasket
1.12
1
Gasket
1.13
3
Screw plug VSTI (acc. to
DIN 908)
1.14
2
Pad retainer
1.15
2
Cap screw
DIN EN ISO 4762 - 10.9
1.16
1
Drain plug (nylon)
1.17
1
Distance plate
1.18
2
Countersunk screw
1.19
1
Connection adapter
1.20
1
Screw plug VSTI (acc. to
DIN 908)
Component assembly 2: Pad retraction sets
Compo-
nent
Quantity
Description
Illustration 5: Pad retraction set
2.1
1
Cap screw
DIN EN ISO 4762 - 10.9
2.2
1
Pressure spring
2.3
1
Sealing plug
To ensure the full braking power, the preparation for assembly needs to be carefully per-
formed.
•
The connection plate or the stand for the brake as well as the brake disk have to be inspected for dimensional
accuracy. For that purpose investigate the connection dimensions, connection surfaces and tolerances as
specified in the drawing (see illustrations 1 and 2 and table 3).
•
Clean and degrease the brake disk and mounting surfaces. Dirt can easily be removed by means of solvents.
4
Assembly
4.1 Components of the brake
4.2 Preparation of assembly
