KTR-STOP
®
M-xxx B-xx-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
445102 EN
6 of 22
3
Please observe protection
note ISO 16016.
Drawn:
2020-03-25 Shg/Wie
Replacing:
KTR-N dated 2019-08-26
Verified:
2020-03-25 Shg
Replaced by:
The brake is delivered in preserved condition and can be stored in a closed, dry place during 12 months.
With favourable storage conditions its properties remain unchanged for up to 12 months.
If the brake is stored over a longer period exceeding 12 months as well as after each transport the corrosion pro-
tection needs to be renewed and the brake has to be applied over the full braking distance in order to prevent the
gaskets from sticking together.
!
The storage rooms must not include any ozone-generating devices like e. g. fluorescent
light sources, mercury-vapour lamps or electrical high-voltage appliances.
Humid storage rooms are not suitable.
Please make sure that condensation is not generated. The best relative air humidity is less
than 65 %.
!
In order to avoid any injuries and any kind of damage please always make use of proper
transport and lifting equipment.
The brake is packed differently each depending on number and kind of transport. Unless otherwise contractually
agreed, packaging will follow the in-house packaging specifications of KTR.
The brake is supplied in pre-assembled condition. Before assembly the brake has to be inspected for completen-
ess.
The brake is generally supplied with the transport lock mounted.
The screw plug (component 1.20) is attached to the brake in bulk.
Components/component assemblies of brake
– Type M-xxx B-xx-xx
Compo-
nent/suba
ssembly
Quantity
Description
1
2
Housing with components
2
4
Pad retraction set on fixed side
3
2
Brake pad
4
2
1)
Sensor
1) Optionally available
Illustration 3: Components/subassemblies of brake
3
Storage, transport and packaging
3.1 Storage
3.2 Transport and packaging
4
Assembly
4.1 Components of the brake
