KSB Amacan K Скачать руководство пользователя страница 17

Страница: 17 / 126

3 Transport/Storage/Disposal

17 of 126

Amacan K

1579.807/07-EN

3.5 Disposal

WARNING

Fluids, consumables and supplies posing a health hazard

Hazard to persons and the environment!

▷

Collect and dispose of any preservatives, flushing liquids and fluid residues.

▷

Wear safety clothing and a protective mask, if required.

▷

Observe all legal regulations on the disposal of fluids posing a health hazard.

1. Dismantle the product.

Collect greases and other lubricants during dismantling.

2. Separate and sort the materials, e.g. by:

- Metals
- Plastics
- Electronic waste
- Greases and other lubricants

3. Dispose of materials in accordance with local regulations or in another

controlled manner.

Electrical or electronic equipment marked with the adjacent symbol must not be
disposed of in household waste at the end of its service life.

Contact your local waste disposal partner for returns.

If the used electrical or electronic equipment contains personal data, the operator is
responsible for deleting it before the equipment is returned.

Содержание Amacan K































































































































Результаты поиска

Содержание Amacan K

Отзывы:

Похожие инструкции для Amacan K

Бренды по названию

Популярные бренды

KSB Amacan K, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Amacan K

Отзывы:

Похожие инструкции для Amacan K

Бренды по названию

Популярные бренды