Kronoterm WP2 LF-202B, Инструкция по использованию и установке

Страница: 27 / 34

ID.: 17-16-24-3004-02 | 6.2017
26
Setting the operating temperature
By changing the position of the main thermostat button from 0 (the device is turned off), you can
switch between three different programmes.
Each programme operates in its own temperature
zone.
Programmes
Mark
programme Temperature range [°C]
0 (the device is turned off)
7-30
42-52
55-65
Main programme “Normal”
Choosing the main programme “Normal” selects the device’s aggregate as heat source for
heating water. The device heats water with the device’s aggregate until the set desired
temperature of one of the programmes set with the button of the main thermostat is reached.
Programme “Reserve source”
Choosing the main programme “Reserve source” selects the electrical heater as heat source
for heating water. The device heats water with the electrical heater until the set desired
temperature of one of the programmes set with the button of the main thermostat is reached.
Water overheating in the programme “Reserve source” is performed with the electrical heater.
Renewed heating starts when the water temperature set with the programme
HT
drops below the
set desired temperature of the buffer tank for DHW set with the main thermostat button.
NOTE
Because of the operation of the electrical heater, operating costs will be higher than
the “Normal” programme.
Programme “ Reserve source”
Choosing the main programmes “Normal” and “Reserve source” simultaneously selects the
device’s aggregate and electrical heater as heat source for heating water. The device heats
water with the device’s aggregate and electrical heater simultaneously until the set desired
temperature of one of the programmes set with the button of the main thermostat is reached.
NOTE
Because of the operation of the electrical heater, operating costs will be higher than
the “Normal” programme.