Kronoterm WP2 LF-202B, Инструкция по использованию и установке

Страница: 6 / 34

ID.: 17-16-24-3004-02 | 6.2017
5
NOTE
The installation of the device has to be performed in accordance with the
manual; otherwise the manufacturer does not acknowledge the warranty.
NOTE
It is necessary to consider all technical data and instructions in this manual
as well as all warnings and notes during planning, design, installation and
use of the device.
DANGER
Failure to comply with the manual and good practise while connecting the
device to the power supply can lead to serious injury or death.
WARNING
This device is intended for home use. Use of the device in hotels, stores,
farms, light industry and other public buildings is permitted to experts or
specially trained staff.
WARNING
Connecting the device to the power source can only be performed by a
qualified installer.
2.3 Safety warnings and instructions
WARNING
The device cannot be installed on a location where air is polluted with toxic
agents which could damage the device (stables, warehouses with dangerous
substances, outdoors, etc.)
WARNING
The inlet pipe of the device has to be fitted with a safety valve with a nominal
pressure of 0.6 MPa (6 bar) which prevents pressure raising in the water
heater above the nominal pressure.
WARNING
Transportation of the device is allowed in upright position.
WARNING
The buffer tank for DHW is intended for storing drinking water, this is why the
water has to be in accordance with the national regulations on drinking water
in force; otherwise, damage to the device and a termination of the warranty
can arise.
WARNING
If there is no water in the buffer tank for DHW, the device must not be in
operation.
WARNING
The connecting cable has a standard plug suitable for a standard socket (16
A; 230 V ac). This socket has to have its own power supply directly from the