Kronoterm WP2 LF-202B, Инструкция по использованию и установке

Страница: 14 / 34

ID.: 17-16-24-3004-02 | 6.2017
13
3.3 Operating principle
5
6
4
8
3
10
1
2
9
1 Compressor 6 Fan
2 Condenser 8 Temperature sensor for the expansion valve
3 Dehydrator 9 Electric heater
4 Expansion valve 10 Buffer tank for DHW (boiler)
5 Evaporator
The cooling system of the device is a closed circuit system with the heat exchange liquid
R134A. At lower pressure and temperature (i.e. 10 °C) the refrigerant is evaporated in the
evaporator and thus removes heat from the air. Afterwards, the compressor compresses
the refrigerant to a higher pressure, this results in the raising of the refrigerant temperature
to a level higher than the water temperature in the buffer tank for DHW. The refrigerant
then releases the heat in the condenser into the water and condenses as a result. With
the expansion of the refrigerant the pressure and temperature in the refrigerant fall to their
initial level, completing the circular process. This process is repeated throughout the
device’s operation.