Kronoterm WP2 LF-202B, Инструкция по использованию и установке

Страница: 22 / 34

ID.: 17-16-24-3004-02 | 6.2017
21
5.5 Connection for water condensate
By extracting heat from the air, water condensate starts forming on the surface of the
evaporator. The intensity of moisture extraction from the air and the quantity of water
condensate change depending on the temperature and relative moisture. In some cases no
water is extracted from the air, in other cases more than 10 litres of water condensate can be
extracted.
Connecting the pipe for water condensate drainage to
the device.
The syphon for preventing the intake of unpleasant
odours from the drain.
The pipe for water condensate drainage has to be routed in a manner which enables the water
free flow at all time. Connect the drainage pipe with the drain. If this is not possible, a collecting
vessel has to be installed which has to be emptied on a regular basis.
NOTE
When installing the drain pipe for water condensate, pay attention that the pipe
points downwards at all times. A siphon has to be installed on the pipe with a water
column of at least 5 cm. This prevents the intake of unpleasant odours from the
drains.