Kronoterm WP2 LF-202B Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 34

background image

ID.: 17-16-24-3004-02 | 6.2017

4

2 Important information

The manual describes the process of installation and maintenance of the device. The
installation and maintenance can only be performed by qualified personnel. Read the manual
carefully before the installation, this way you will be informed about the intended use,
functionality and process of handling the device.

The manual has to be handed over to the end user after installation.
In case the product shall be given to a third person for use, the manual has to be

handed over to them as well.

Definitions:

  An informed person is a person who reads this manual.
  A qualified person has a certificate of expert qualifications.
  The  authorised  technician  is  trained  and  authorised  by  the  manufacturer  to  perform

maintenance and servicing of the device.

The user uses the device according to its use.
The installer is a person professionally trained for performing hardware and/or electro-

installation work and mounting of the device.

Incorrect use of the device can lead to damage of the device, property or injury to the user.
For limiting risks, the important information in this manual is highlighted with symbols.

2.1 Symbols

Various levels of danger can occur while performing installation, maintenance and use.
Warnings in the manual will guide you to properly and safely handle the device by avoiding
eventual dangers and ensure correct operation of the device.

These symbols mark various risks for the user or the device.

DANGER:

Risk of situations which can lead to serious physical injuries.

WARNING:

Risk of situations which can lead to minor physical injuries.

CAUTION:

Risk of situations which can lead to damage or malfunction of the

device.

This symbol marks information for the user.

NOTE:

A notice which holds important information regarding the device,

requirements and the manufacturer.

2.2 General warnings and instructions

NOTE

Read the instructions for use and installation before installation.

NOTE

Any  remaking  or  replacement  of  original  components  of  the  device
eliminates the manufacturer’s guarantee for safe and functional operation.
In  the  case  of  undesignated  and  incorrect  use  of  the  device,  the
manufacturer  is  not  responsible  for  the  consequences  and  will  not
acknowledge  claims  for  damages  in  these  cases.  The  user  is  solely
responsible for injuries and damages on the device itself or on other objects
resulting from undesignated and incorrect use of the device.

«
...
3
4
5
6
7
...
»

Содержание WP2 LF-202B



































Отзывы:

Нет отзывов

Похожие инструкции для WP2 LF-202B

Бренд: Davey Страницы: 12

Бренд: Barmesa Pumps Страницы: 42

Бренд: NARVI Страницы: 12

Бренд: Salda Страницы: 16

Бренд: Salda Страницы: 8

Бренд: Walchem Страницы: 31

VeroLine-IPS 20

Бренд: Wilo Страницы: 42

Бренд: Gardena Страницы: 10

Бренд: UNITED Страницы: 4

Бренд: KAMMAK Страницы: 8

Бренд: Airetool Страницы: 20

Бренд: Gardner Denver Страницы: 47

Бренд: Salda Страницы: 14

Бренд: Yoshitake Страницы: 6

Бренд: RainPoint Страницы: 32

ECOMOD AHP60 14 kW

Бренд: Ideal Heating Страницы: 70

Бренд: Dimplex Страницы: 28

Бренд: Heat Controller Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды