manualshive.com logo in svg

Krone Round Pack 1250, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Round Pack 1250 Скачать руководство пользователя страница 8

I - 2

General Information

1.2.6 Operation in Accordance with

Intended Use

The Round Pack 1250 / MultiCut and Round Pack 1550/
MultiCut round balers are designed for standard agri-
cultural use only (intended use).

Any use of the machine for other purposes is deemed

not

 to be in accordance with intended use. The

manufacturer shall not be held liable for any damage
which resulting from improper use, which is undertaken
at the operator's own risk.

Operation in accordance with intended use also includes
observing the operating, maintenance and service
instructions specified by the manufacturer.

Permissible baling material:
grass fodder such as hay, stray and silage.

The collection and baling of other
materials is permitted only with the
prior approval of the manufacturer.
The basic requirements in any case
are swath form loading of the baling
material and automatic lifting by the
pick-up.

1.2.7 General Technical Data

• Road driving is permitted only when the bale chamber

is empty and closed.

• Permissible top speed: 40 km/h / 30 km/h

• For machines which have no brakes, the pulling

tractor's tare weight must correspond with the
permitted operating specifications, or at least have a
weight which corresponds with the baler's tare weight.

• For machines which have an operating permit, follow

the conditions contained therein!

• When operating the baler in the field, a supporting

load of 600 kg (on the ring hitch) should not be
exceeded.

• Switch off the electrical operating control when driving

on roads!

The tailgate must only be operated if
the baler is attached correctly to the
tractor. If this is not respected there is a
risk of tipping to the rear.

Содержание Round Pack 1250









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды