Krone Round Pack 1250, Оригинальная инструкция по эксплуатации

Страница: 38 / 136

V - 4
Basic Settings and Operation
Setting the cutting length:
Adjustment is carried out on the right-hand side of the
machine.
• Rotate the locking lever (3) clockwise to unlock the
blade control shaft.
• Attach the multi-purpose key (1) to the
blade control shaft (2).
• If it is difficult to turn the blade shaft, the longer multi-
purpose spanner/wrench can also be used.
• Use the multi-purpose key (1) to rotate the blade
control shaft counterclockwise into the desired
position (2).
• Rotate the locking lever (3) counterclockwise until it
engages.
Do not rotate the locking lever in the opposite sense. In
this case it may happen that the blades are not
engaged in their working position.
• Detach the multi-purpose key (1) and store it correctly
in the transport mounting and secure with spring pin.
After adjustment make sure that the
blades are in the working position.
CP101251
3
2
1
CPB00050
2 1
3
4
3
1
3
2
CPB00060
Adjust the setting with the aid of the multi-purpose
spanner/wrench (3) or (4).
These are located inside a bracket on the right-hand side
of the machine.
• Remove the spring pin (1).
• Detach the multi-purpose spanner/wrench (3) or (4)
from the retaining bolt (2).