Krone Round Pack 1250, Оригинальная инструкция по эксплуатации

Страница: 126 / 136

A - 4
Appendix
A1.2 Adjusting Drawbar Height
To ensure optimum pick-up of baling material, the drawbar
height must be adapted to the type of tractor being used.
When attached to the tractor, the pick-up (1) must be
parallel to the ground when lowered into working
position.The height of the ring hitch should then be
matched to the height of the tractor hitch.
To do this:
switch the pick-up into transport position
• Raise the pick-up (tractor hydraulics)
• Slacken nuts (2).
• Slide the depth control (1) backwards.
• Tighten nuts (2).
• Adjust both sides.
• Actuate the “raise pick-up” control valve.
1
2
RBV19221
1
2
RP-A-23
Adjust the position of the pick-up.
•
Crank the stand (1) up or down until the upper edge of
the pick-up side section (2) is parallel to the ground.
RBV0425A
2
1