Krone Round Pack 1250, Оригинальная инструкция по эксплуатации

Страница: 50 / 136

V - 16
Basic Settings and Operation
5.6.5 Setting the Twine Limiter
The position of the twine limiter determines the spacing
between the outermost wrap and the outer edge of the
bale.
The setting depends on the length and type of baling ma-
terial to prevent the thread from slipping off the round bale.
long
Adjustment:
• Fold the wrapping mechanism forward.
• Undo the bolts (3).
• Slide the twine limiter (1) into the desired position.
• Tighten the bolts (3).
• Always adjust both sides.
5.6.6 Setting the Twine Brake
The twine brake (4) tautens the baler twine (1).
The setting depends on the type and quality of the baler
twine.
Adjustment:
• Rotate wing nuts (2) clockwise (increased pretension,
increased brake force).
• Rotate wing nuts (2) counterclockwise (reduced
pretension, reduced brake force).
• Always adjust both sides.
The baler twine should be kept under tension at all times
to ensure that the blades cut correctly.
Be careful not to tighten the brake so
much that the rubber-coated roller is
unable to transport the thread at the start.
length of
baling
material
distance between the two
twine limiters
medi-
um
short
narrow
wide
medium
KR-1-063
3
2
1
CP400004
4
1
2 2
3
3