manualshive.com logo in svg

Krone Round Pack 1250, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Round Pack 1250 Скачать руководство пользователя страница 129

A - 7

Appendix

RBV01010

1

VP-1-035

1

2

•

Pull apart the PTO shaft.

•

Slide the PTO shaft (1) onto the tractor PTO shaft.

•

Slide the PTO shaft with the overload protection feature
(2) onto the machine shaft.

•

Measure the overlap.

•

Complete length adjustment in accordance with the
operating instructions provided by the manufacturer of
the PTO shaft.

A1.3.3 Length Adjustment

The length of the PTO shaft (1) needs to be adjusted.
The shortest operating position will be used in sharp
curves.

•

Hitch the round baler to the tractor.

•

Take up the shortest operating position for the
PTO shaft.

A1.3.2 Attaching the guard cup for universal

shaft

RPN00101

1

2

3

•

Remove guard cup (1) out of the twine box.

•

Push guard cup (1) above the P.T.O. shaft at transfer
gearbox (3) and install it with its hose clamp (2) at the
transfer gearbox (3) in that way, that the great bore
hole is all the way up around the circumference of the
guard cup (1).

DANGER!
Danger of entrainment at P.T.O. shaft.
Effect: Risk of injury when drawing in open
long hair, jewellery or baggy clothes.

• The machine may only be operated

with an attached guard cup.

Содержание Round Pack 1250









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды