Controlling the VP-725DSA Presentation Switcher / Scaler
35
Selecting Manual Search disables the Auto Search option (which finds the
active source). After powering up, the
VP-725DSA
will not scan for an active
input but will display the source selected prior to power down, even if that
input is inactive.
Figure 24 illustrates the Group Select option. The Video Group
1
, Audio
Group
2
, AV Group
3
, Scaler
4
, Master Audio
5
, and Master AV
6
are available
with the
VP-725DSA
:
Figure 24: Selecting the Group
Figure 25 illustrates the Source:
Figure 25: Selecting the Source
1 Selects the video input from each group: CV, YC, Component, VGA, DVI for switching to its local (group) output
2 Selects the audio (breakaway mode) input from each group for switching
3 Selects the audio-follow-video input from each group for switching
4 Converts the selected input (one of 18) to the SCALED OUTPUTS
5 Routes the selected audio input (one of 18) to the MASTER OUT terminal block connector (see the example in Figure 4)
6 Converts the selected video input (one of 18) to the SCALED OUTPUTS, and also routes the selected audio input (one of
18) to the MASTER OUT terminal block connector (see the example in Figure 5)
