KRAMER: SIMPLE CREATIVE TECHNOLOGY
Controlling the VP-725DSA Presentation Switcher / Scaler
58
To change the IP address of the unit
1
, first select the device on the list and
then, using the right mouse button, right-click the mouse button. A selection
box appears, stating “ Set IP Address and “ Device Settings”
2
. Select Device
setting, enter the new IP address and click
OK
. The new IP address will
appear on the screen.
Figure 59: Setting an IP Number
9.4.3
Control the VP-725DSA via the Ethernet/Serial Port
To control the
VP-725DSA
via the Ethernet, do the following:
1. On the
VP725 Ethernet Application
screen, click the
Control
tab.
The Control screen appears (see Figure 60).
The Control tab includes a set of control buttons, which enable you to
operate and control the machine via the Ethernet or serial ports,
according to the configuration.
2. Press one of the eight orange buttons (1 to 8) that appear on the top left
side on the screen of the Control tab
3
.
Control the selected machine via the control buttons on the screen
4
.
1 The default IP address can be changed to fit your network system
2 From which you can enable/disable the DHCP client (DHCP is Dynamic Host Configuration Protocol), as well as setting
the Baud rate (for example, 9600 or 115200)
3 When a machine is connected, the button lights. Otherwise it is unavailable
4 Button turns green
