Kramer VP-725DSA Скачать руководство пользователя

Страница: 17 / 81

Installing on a Rack

5 Installing on a Rack

This section describes what to do before installing on a rack and how to rack

mount.

Before Installing on a Rack

Before installing on a rack, be sure that the environment is within

the recommended range:
Operating temperature range +5 to +45 Deg. Centigrade
Operating humidity range

5 to 65 % RHL, non-condensing

Storage temperature range

-20 to +70 Deg. Centigrade

Storage humidity range

5 to 95% RHL, non-condensing

CAUTION!!

When installing on a 19" rack, avoid hazards by taking care

that:

It is located within the recommended environmental

conditions, as the operating ambient temperature of a

closed or multi unit rack assembly may exceed the room

ambient temperature.

Once rack mounted, enough air will still flow around the

machine.

The machine is placed straight in the correct horizontal

position.

You do not overload the circuit(s). When connecting the

machine to the supply circuit, overloading the circuits

might have a detrimental effect on overcurrent

protection and supply wiring. Refer to the appropriate

nameplate ratings for information. For example, for fuse

replacement, see the value printed on the product label.

The machine is earthed (grounded) in a reliable way

and is connected only to an electricity socket with

grounding. Pay particular attention to supply

connections other than direct connections to the branch

circuit (for example, the use of power strips), and that

you use only the power cord that is supplied with the

machine.

How to Rack Mount

To rack-mount the machine:
1

Attach both ear brackets to the

machine. To do so, remove the

screws from each side of the

machine (3 on each side), and

replace those screws through

the ear brackets.

Place the ears of the machine

against the rack rails, and

insert the proper screws (not

provided) through each of the

four holes in the rack ears.

Note that:

In some models, the front panel

may feature built-in rack ears

Detachable rack ears can be

removed for desktop use

Always mount the machine in the

rack before you attach any cables or

connect the machine to the power

If you are using a Kramer rack

adapter kit (for a machine that is not

19"), see the Rack Adapters user

manual for installation instructions

(you can download it at:

http://www.kramerelectronics.com)

Содержание VP-725DSA


















































































Результаты поиска

Содержание VP-725DSA

Отзывы:

Похожие инструкции для VP-725DSA

Бренды по названию

Популярные бренды

Kramer VP-725DSA, Руководство пользователя

Результаты поиска

Содержание VP-725DSA

Отзывы:

Похожие инструкции для VP-725DSA

Бренды по названию

Популярные бренды