KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the Presentation Switcher / Scaler
30
8.2 Choosing the Output Resolution
You can select the output resolution by pressing the OUT key on the infra-red
remote control transmitter (see Figure 55) or via the Output Setting OSD
menu (see Table 17). The OSD status appears superimposed over the top right
corner of the screen (when the Source Prompt is ON) for a few seconds
1
, as
Figure 17 illustrates
2
:
Figure 17: OSD Output Status
1 By default, 20 seconds. But you can reset the timeout (from 3 to 60 seconds), see section 9.1.5.7
2 Adjusting the output resolution results in a corresponding adjustment to the size of the OSD status window
