12
FRAMING
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#CLW-ST R.1 February 2021
3.2 Appliance Placement Considerations
WARNING: Due to high temperatures, the appliance should be located
out of traffic and away from furniture and draperies.
•
This appliance must be installed on a level surface capable of
supporting the fireplace and venting. Determine your vent
requirements before framing your appliance.
If installing #KPV Kozy Power Vent, please reference the manual
included with the kit.
•
This fireplace may be installed in a bedroom.
•
Please be aware of the large amount of heat this fireplace will
produce when determining a location.
•
This appliance has a front side and a back side. The front side is
the access side of the fireplace, where the glass frame assembly
is easily removable and the gas valve and control module are
located. The back side is the fixed side of the fireplace where the
glass frame assembly is fixed to the fireplace with flange nuts.
Make sure to place the access/front side in an accessible location.
Lift handle
2” x 4”
Access/front side of fireplace - gas valve and control module
visible in control compartment
Figure 3.1, Access/Front Side of CLW-ST
Figure 3.2, Lift Handles
3.2.1 Moving the Appliance
This appliance is heavy. We recommend a team lift when moving,
placing, and positioning the appliance.
On both sides of the appliance, there are lift handles that allow a
hand lift (no sharp edges), or allow a 2” x 4” piece of lumber to be
inserted inside the lift handles, as shown in Figure 3.2.
