#CLW-ST R.1 February 2021
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
FRAMING
23
3.8 Exterior and Interior Heat
Transfer Kit Cover Plates
Figure 3.13 shows removal of the Heat Transfer Kit cover plates. There
are (2) rectangular cover plates located on the side opposite of the
exhaust on the outer shell of the appliance. Both cover plates must be
removed for either kit. See the #HTK-CWST air chute install instruction
sheet for more information.
This appliance can have (2) of the same Heat Transfer Kit installed at
the same time. It can be one or two of the same (HTK-EXT or HTK-INT)
heat transfer kit.
Remove (2) rectangular cover plates for both kits, up to (2) of the same kit may be used.
See heat transfer kit manuals (HTK-EXT or HTK-INT) for more information.
Figure 3.13, Heat Transfer Kit Cover Plate Removal
