#BH38-500 & #BH38-B501
SECTION 8
FIREPLACE SETUP
#BHM-38 & #BHM-38-BW
R.1
55
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
8.4 #BH38-500 & #BH38-B501
Log Set Installation
CAUTION: Do not place logs directly over burner portholes. Improper
log placement may affect flame appearance and cause excessive soot
to build upon the logs and glass.
NOTE: Your logs may look different than shown. The logs will install the
same for both traditional (#BH38-500) and birchwood (#BH38-B501).
•
If converting to propane, complete the conversion before
installing the log set. Follow the conversion instructions included
with the kit.
•
Log numbers are located on each log. Refer to the following
instructions and illustrations for proper log placement.
1. Align the holes in the bottom of log 1 with the studs on the
burner (
FIGURE 8.6
) and place the log into position at the rear of
the firebox, as shown in
FIGURE 8.7.
2. Align the holes in the bottom of logs 2, 3, 4, and 5 with the studs
on the burner (
FIGURE 8.6
) and place the logs into position, as
shown in
FIGURE 8.7.
#BH38-500 & #BH38-B501
continues on page 56
Studs for log 2
Stud for log 3
Studs for log 1
Stud for log 4
Studs for log 5
FIGURE 8.6
Log Positioning Studs
FIGURE 8.7
Base Logs
