Safety Barrier and Surround Installation
SECTION 4
FACING AND FINISHING
#BHM-38 & #BHM-38-BW
R.1 September 2021
38
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
4.2 Safety Barrier and Surround
Installation
4.2.1 Safety Barrier Screen (#BH38-ES)
1. Locate the (4) slots ([2] on each side) located on each side of the
glass valance.
2. There are two mounting options based on notched tab position.
See
FIGURE 4.6
below for a flush or a recessed mount.
3. Align the notched tabs, located on the back of the safety barrier
screen, with the slots on the glass valance for the desired mount.
4. Raise the safety barrier screen front slightly into slots and allow
the tabs to lower into position.
•
To remove safety barrier screen: lift the screen up and out of
slots.
4.2.2 Optional Surround (#BH38-RS)
IMPORTANT: The optional surround must be attached before fireplace
installation.
Kit includes: (1) surround; (4) screws
1. Insert the rectangle surround into the opening of the fireplace.
2. Align the slots in the surround with the holes in the inner edge
of the outer shell of the fireplace (
FIGURE 4.7
). Adjust the depth
to accommodate finishing material.
3. Secure the surround to the fireplace with the provided (4)
screws.
Recessed mount
Flush mount
FIGURE 4.6
Safety Screen Installation
FIGURE 4.7
Rectangle Surround Installation
