Nailing Flange Assembly and Installation
SECTION 3
FRAMING
#BHM-38 & #BHM-38-BW
R.1 September 2021
12
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
3.2 Nailing Flange
Assembly and Installation
CAUTION: Never permanently remove these assemblies from the
fireplace—they must be secured regardless of finish material used.
The nailing flanges MUST BE INSTALLED for all applications.
Refer to
FIGURE 3.2
below for nailing flange installation.
1. Remove (2) nailing flanges from the right and left side of the
fireplace.
2. Align nailing flanges with holes on the outside corners of
fireplace, with the stand-off flanges on the nailing flanges facing
away from the fireplace.
3. Secure the nailing flanges to the fireplace with screws (provided)
through the slots in nailing flanges.
4. Bend perforation on nailing flange until parallel with fireplace
face. Do not bend toward fireplace face.
5. UNTIL ALL FRAMING REQUIREMENTS ARE COMPLETED:
Position framing stud against the small stand-off (located on
backside of nailing flange). Secure with nails or screws.
•
When installed, the nailing flanges provide the minimum
3½” (89mm) clearance from the sides of the fireplace
to framing.
Nailing flange
installed
Stand-off
flange
Nailing flange
as shipped
Nailing flange
installed
Framing stud
Nailing flange
Stand-off flange
Nailing flange
Framing stud
3
½
” (89mm)
clearance
BACK VIEW
FRONT VIEW
FRONT VIEW
TOP VIEW
FIGURE 3.2
Nailing Flange Installation
ALL DESIGN OPTIONS INSTALLATION
