Kontron KBox C-102 Series, Руководство пользователя

Страница: 86 / 144

KBox C-102 - User Guide, Rev. 1.0
www.kontron.com // 86
Sub-Screen Function Second level Sub-Screen / Description
ACPI settings>
(continued)
Lock Legacy
Resources> Enables or disable lock of legacy resources
[Enabled, Disabled]
S3 Video
Repost> Enables or disables S3 video repost
[Enabled, Disabled]
Miscellaneous>
Watchdog>
Auto
Reload> Enables automatic reload of watchdog timers on timeout
[Enabled, Disabled]
Global
Lock> Enable sets all Watchdog registers (except for WD_KICK) to
read only, until board is reset. [Enabled, Disabled]
Stage 1
Mode> Selects action for this Watchdog stage
[Disabled, Reset, NMI, SCI, Delay, WDT Signal only]
Additional Information two-staged watchdog
Programmable stages to trigger different actions - If one stage is disabled, then the next stage
is also disabled.
Common actions for a watchdog trigger events ‘Delay’, ‘Reset’ and ‘Watchdog signal only’
CPLD code allows for triggering NMI or SCI. This needs programming of a predefined action
inside the BIOS and therefore can only be used in a customized BIOS solution.
Timeouts that can be set to eight different fixed values between 1 second and 30 minutes.
Reset Button
Behavior>
Selects reset button behavior
[Chipset Reset, Power cycle]
I2C Speed> Selects internal I2C bus speed between (1 kHz and 400 kHz)
[200 kHz]
On-board I2C
Mode> Keep ‘Multimaster’ setting unless otherwise noted
[MultiMaster, BusClear]
Manufacturing
Mode> Read only field
[Disabled]
LID Switch
Mode> Shows or hides Lid Switch Inside ACPI OS. The default setting is disabled.
[Disabled, Active normal, Active inverse]
Sleep Button
Mode> Shows or hides Sleep Button inside ACPI OS. Default setting is disabled.
[Enabled, Disabled]
ACPI
Temperature
Polling> Sets mode used for temperature polling through the OSPM
(0 is disabled and 1 enabled9.
[Enabled, Disabled]
PCI
ExpressCard 0> Controls PCIe port for ExpressCard support
If not used, keep in the disabled state.
[Port 1, Port 2, Port 3, Port4, Disabled]
PCI
ExpressCard 1> Controls PCIe port for ExpressCard support
If not used, keep in the disabled state.
[Port 1, Port 2, Port 3, Port4, Disabled]
SMART
Settings> Smart Self Test> Run Smart Self Test on all HDDs during POST
[Enabled, Disabled]
H/W Monitor>
CPU
Temperature> Read only field
Displays CPU temperature in °C
Module
Temperate> Read only field
Displays module temperature in °C