Kontron KBox C-102 Series, Руководство пользователя

Страница: 50 / 144

KBox C-102 - User Guide, Rev. 1.0
www.kontron.com // 50
6.3.5. Installing/Removing PCI/PCIe Expansion Cards (for KBox C-102-4/-2/-1 only)
The PCI/PCIe expansion cards can be installed into the slots on the front side of the system (Figure 59/Figure 61). The
slots are marked with “PCIe 1” to “PCIe 4”. It is recommended to expand your KBox C-102 with PCI/PCIe cards before it
is installed into a control cabinet.
1. Close all applications; shut down the system properly and disconnect the connection to the power source.
Disconnect all peripherals.
2. To have access to the PCI/PCIe sockets you have to open the KBox C-102-4/-2/-1 as described in the section 6.2
“Opening and Closing the KBox C-102” (step 1-6).
3. To remove/install an expansion card, you have to remove the corresponding card/slot bracket (refer to
Figure 59/Figure 61 and Figure 40/Figure 41). Loosen the corresponding fastening screw on the internal side,
which secures the slot/card bracket and remove it. Retain the screw for later use (refer to Figure 40/Figure 41,
pos. 2).
Figure 40: Detail of the KBox C-102-2 with PCIe riser card with 2x PCIe x4 sockets
Figure 41: Detail of the KBox C-102-2 with PCI-PCIe riser card with 1x PCI (32 bit) and 1x PCIe x4 sockets
Figure 42: Detail of the KBox C-102-4 with PCIe riser card with 4x PCIe x4 sockets
1
3
9
10
2
5
6
4
3
2
2
1
1
3
5
8
7
2
5
6
12
13
11