Kontron KBox C-102 Series, Руководство пользователя

Страница: 109 / 144

KBox C-102 - User Guide, Rev. 1.0
www.kontron.com // 109
15.2.3. Examples of Startup Scripts
15.2.3.1. Execute Shell Script on other Hard Drive
This example (
startup.nsh)
executes the shell script named
bootme.nsh
located in the root of the first detected
disc drive (
fs0
).
15.2.3.2. Execute Shell Script on other Hard Drive
This example (
startup.nsh)
executes the shell script named
bootme.nsh
located in the root of the first detected
disc drive (
fs0
).
fs0:
bootme.nsh
15.2.3.3. Enable Watchdog
The uEFI Shell provides environment variables used to control the execution flow.
The following sample start-up script shows the uEFI Shell environment
wdt_enable
, used to control the Watchdog.
echo -off
echo “Executing sample startup.nsh...”
if %wdt_enable% == “on” then
kwatchdog -t 15
echo “Watchdog enabled”
endif
To create uEFI Shell environment variable, use the set uEFI Shell command as shown below:
Shell> set wdt_enable on
Shell> set
wdt_enable : on
Shell> reset