Kontron KBox C-102 Series, Руководство пользователя

Страница: 133 / 144

KBox C-102 - User Guide, Rev. 1.0
www.kontron.com // 133
17.2.8. Board ID Register Low Byte BIDL
This register contains the Low byte of the Board ID.
Table 36: Board ID Register Low Byte BIDL
0x10D Board ID Register Low Byte BIDL
Bit 7 6 5 4 3 2 1 0
Name BIDL[7:0]
Access R
Reset P $88
17.2.9. LED Configuration Register LCFG
The LED Configuration Register holds a series of bits defining the onboard configuration for the front panel General
Purpose LEDs.
Table 37: LED Configuration Register LCFG
0x110 LED Configuration Register LCFG
Bit 7 6 5 4 3 2 1 0
Name - - - - LCON
Access - - - - R/W
Reset PS
0 0 0 0 %0000
LCON[3:0]: User-Specific LED Configuration – This bit field selects the LED Configuration mode. The default setting
after power up is POST mode.
0000 = POST
0001 = Reserved
0010 = Mode B (default after Boot)
remaining = Reserved
In POST mode all eight LED’s will display POST code during the pre-boot phase. Mode B is used for display of general
purpose informations.