Kontron KBox C-102 Series, Руководство пользователя

Страница: 128 / 144

KBox C-102 - User Guide, Rev. 1.0
www.kontron.com // 128
17.2. Register Descriptions
17.2.1. Status Register 0 STAT0
Table 25: Status Register 0 STAT0
0x100 Status Register 0 STAT0
Bit 7 6 5 4 3 2 1
Name FPPB BBEI BFSS[1:0] - - - -
Access R R/WO R R R R R
Reset PS na 0 na 0 0 0 0
FPPB: Front Panel Power Button – This bit is derived from internal signal shaping logic formed by helper state
machine PWBTN and represents current front panel power button status. A one in this bit means button is pressed
for longer than 50msec.
BBEI: BIOS Boot End Indication – This bit is set by BIOS after finishing booting, cleared otherwise. After this bit is set, it
cannot be cleared again by software. Clearing is done by reset events P and S.
BFSS[1:0]: Boot Flash Selections Status – This bit field indicates which Flash device is currently in use or referenced
and derived from rescue logic block.
Decoding of Flash selection status:
Table 26: Decoding of Flash selection status
BFSS[1] BFSS[0] Flash reference
0 0 Standard SPI boot flash
0 1 Recovery SPI boot flash
1 0 Reserved
1 1 Reserved
17.2.2. Control Register 0 CTRL0
Table 27: Control Register 0 CTRL0
0x102 Control Register 0 CTRL0
Bit 7 6 5 4 3 2 1 0
Name - - BFUS - - - - -
Access - - R/W - - - - -
Reset PS 0 0 0 0 0 0 0 0
BFUS: Boot Flash Update Selection - The active SPI boot flash will be toggled each time if bit BFUS is written with 0 to
1 or 1 to 0. The active SPI boot flash can be read back via the Status Register 0, bit field BFSS.
The effective selection of rescue BIOS flash is indicated by red blinking rescue LED.