Kontron KBox C-102 Series, Руководство пользователя

Страница: 83 / 144

KBox C-102 - User Guide, Rev. 1.0
www.kontron.com // 83
Sub-Screen Function Second level Sub-Screen / Description
Power and
Performance>
(continued)
CPU Power
management
Control>
(continued)
Intel®
Speedstep ™> Allows support for more than two frequency ranges
[Enabled, Disabled]
Intel® Speed
Shift
Technology> Intel Speed Shift Technology support. Enable exposes
CPPC v2 interface to allow for hardware controlled
P-states.
[Enabled, Disabled]
Turbo Mode> Enables or disables Processor Turbo mode. Note:
EMTTM must also be enabled.
Auto means enabled unless the max. turbo ratio is
bigger than 16-SKL A0 W/A.
[Enabled, Disabled]
C-states> Enables or disables CPU power management to allow
CPU to enter C-Sates when not 100% utilized.
[Enabled, Disabled]
Enhanced C-
states> Enables or disables C1E. If enabled CPU switches to
minimum speed when all cores enter C-state.
[Enabled, Disabled]
Packaged C-
state Limit> Maximum Package C-State limit setting.
Default: leaves the factory default value.
Auto initializes to deepest available package c-state
limit.
[Auto, CPU Default, C10, C9, C8, C7S, C7, C6, C3, C2, C0/C1]
Thermal
Monitor> Enable/disable thermal monitor
[Enabled, Disabled]
GT Power
management
Control> RC6 (Render
standby)> Check to enable render standby support.
[Enabled, Disabled]
Maximum GT
Frequency> Maximum GT frequency limited by user.
Choose from range 350 MHz (RPN) to 1000 MHz (RPO).
Out of range values are clipped to the minimum and
maximum range values above.
[Default Max Frequency, 100 MHz, – 1200 MHz]
PCH-FW
Configuration>
Read only fields
ME FW Version, ME Firmware Mode, ME Firmware SKU, ME File System Integrity Value,
ME Firmware Status 1, ME Firmware Status 2 and NFC Support.
ME State>
If disabled, ME enters ME temporarily disabled mode.
[Enabled, Disabled]
ME Unconfig ON
RTC Clear> If disabled, ME is not unconfigured on RTC clear.
Enables or disables ME FW Image RE-Flash function
Comms Hub
Support> Support for Comms hub
[Enabled, Disabled]
JHI Support> Enables or disables Intel® DAL Host Interface Service (JHI)
[Enabled, Disabled]
Core BIOS Done
Message> Enables or disables core BIOS done message sent to ME
[Enabled, Disabled]
Firmware
Update
Configuration> ME FW Image
Re-Flash> Enables or disables ME FW Image RE-Flash function
[Enabled, Disabled]
Local FW
Update> Enables or disables local FW update function
[Enabled, Disabled]