Kontron KBox C-102 Series, Руководство пользователя

Страница: 32 / 144

KBox C-102 - User Guide, Rev. 1.0
www.kontron.com // 32
4.4.10. Status and General Purpose LEDs
After power is applied and the KBox C-102 performs the boot procedure, the LEDs show the POST code. In case of a
boot failure within the uEFI the last post code is displayed. When the boot phase is passed without errors, the LEDs
change to their status and general purpose function.
The following table provides information concerning these LEDs (Figure 59 and Figure 18).
Figure 18: Detail - Status and General Purpose LEDs
Table 4: Status and General Purpose LEDs
Status and General Purpose LEDs
Designator Function Color Description
THERM Thermal
Green Normal operation
Red blinking
The system turns off due
to over temperature
DRIVE Drives (SSD/HDD) Green SSD/HDD active
SD SD Card Green SD card active
WD Watchdog Red blinking
Watchdog timeout
occurred
GP1 General Purpose 1
Red/Green/Orange
User general purpose 1
GP2 General Purpose 2
Red/Green/Orange
User general purpose 2
GP3 General Purpose 3
Red/Green/Orange
User general purpose 3
GP4 General Purpose 4
Red/Green/Orange
User general purpose 4