600B SERIES MAINTENANCE MANUAL
JULY 2016 - V1.0
PAGE 3
Torque Specifications for Fasteners
Listed below are the torque specifications for those fasteners that have a specified torque value. Securely
tighten all other fasteners. Internal drive component torque specifications are stated in the Konrad
Series 600B Technical Manual.
Description
Torque Value
Drive Shaft Flange to Transmission
Output Flange Shaft Nuts/Bolts (if applicable)
70 lb. ft. (95 Nm)
Transom Assembly / Gimbal Housing
Studs to Inner Transom Plate Nuts (6)
50 lb. ft. (67.8 Nm)
Gimbal Ring Center Pin Cover, Hex Head Cap Screw (2)
35 lb. ft. (47.5 Nm)
Gimbal Ring Center Pin Retaining Hex Head Cap Screw (1)
50 lb. ft. (67.8 Nm)
Trim Sender Cover Button Head Cap Screws (2)
13 lb. in. (147 Ncm)
Trim Sender Housing Socket Head Cap Screws (2)
8 lb. ft. (10.8 Nm)
Trim Sender Socket Head Cap Screws (2)
8 lb ft. (10.8 Nm)
Upper Gear Housing Cap, Socket Head Cap Screws (4)
20 lb. ft. (27 Nm)
Gimbal Carrier Compression Ring Socket Head Cap Screws (4)
Tail piece Compression Ring Hex Head Cap Screws (5)
45 lb. ft. (61 Nm)
35 lb. ft. (47.5 Nm)
620B Propeller Nut (1)
80 lb. ft. (109 Nm)
660B Forward Propeller Nut (1)
100 lb. ft. (136 Nm)
660B Aft Propeller Nut (1)
60 lb. ft. (81 Nm)
680B Forward Propeller Nut (1)
100 lb. ft. (136 Nm)
680B Aft Propeller Nut (1)
80 lb. ft. (109 Nm)
Chapter 1 - Sterndrive
(continued)
