600B SERIES MAINTENANCE MANUAL
JULY 2016 - V1.0
PAGE 67
Chapter 3 - Complex Maintenance
(continued)
Remote Mount driveshaft alignment
4.
Rotate both flanges until the alignment sticks are
in a vertical position..
5.
Measure the distance between points A-B, C-D,
and A-D, C-B
Adjust the engine mounts until the measured
distance between points A-B and C-D are within
.030 inches or .762mm. of each other.
See alignment specifications chart in the following
pages.
6.
Rotate the flanges until the sticks are horizontal
and remeasure points A-B, C-D, A-D, and C-B
Adjust the engine mounts until the measured
distances between the points A-B and C-D is within
.030 inches or .762 mm. of each other
.
A
B
C
D
Top view looking down
Side view
C
D
A
B
