Kongsberg Simrad MF90, Руководство по установке

Страница: 40 / 426

38
476671/B
Dry docking requirements
Whenever a hull unit and an installation trunk are mounted under the vessel’s hull, special
considerations must be made prior to dry docking.
The location of the MF90 installation trunk must be noted on the vessel’s docking plan
for future reference.
Make sure that ample clearance under the MF90 installation trunk and/or blister is provided
when you are placing the vessel in dry dock. Avoid locating supporting blocks or structures
in the vicinity of the MF90 installation trunk.
Important
Prior to dry docking, turn off the MF90 system. If necessary, disengage the circuit
breaker. Label the Processor Unit and/or the circuit breaker clearly to prevent anyone from
accidentally turning on the MF90 system.
Related topics
Simrad MF90, page 13
Installation requirements, page 35
Requirement for classification approval
Classification approval is required for the MF90 system installation.
The design and mounting of the installation trunk for the MF90 system must be approved
by the vessel’s national registry and corresponding maritime authority and/or classification
society. The shipowner and shipyard doing the installation are responsible for obtaining and
paying for such approval.
Related topics
Simrad MF90, page 13
Installation requirements, page 35
Network security
If a MF90 system is connected to a local area network, data security is important.
Equipment manufactured by Kongsberg Maritime is frequently connected to the vessel's
local area network (LAN). When you connect a computer to a local area network you will
always expose the data on that computer. All other computers connected to the same
network may be able to access your data. Several threats may immediately occur:
Simrad MF90 Installation Manual