Kongsberg Simrad EK80, Руководство по установке

Страница: 269 / 354

394149/D
267
X Offset Y Offset Z Offset
Requirements
Results
Position data is provided.
Speed data is provided.
Distance data is provided.
Heading data is provided.
The relevant communication parameters are recorded.
Date and signature:
Related topics
Test procedures, page 256
Verifying the communication with speed log
Without the input from a speed log, the EK80 will not be able to present correct
navigational information. The vessel speed is shown on the top bar if you have enabled
this in the
Display Options
dialog box. The communication with the sensor is tested.
Prerequisites
The EK80 hardware units are installed as specified in this manual.
• The sensor is connected to a communication port on the EK80. The sensor is turned
on and in normal operation.
• The interface port is set up with the correct communication parameters.
• You are familiar with NMEA and other relevant datagram formats.
• You know how to set up the parameters for serial and local area network (LAN)
communication.
• All relevant vessel drawings, installation reports and/or measurement results are
available.
• The EK80 system is turned on and operates normally.
• The vessel is berthed or at sea.
Neither tools nor instruments are required. For connections and communication
parameters, see the relevant end-user documentation from the sensor manufacturer.
Context
In most cases a suitable sensor is already installed on the vessel. A global positioning
system (GPS) with a compatible output format can also be used.
Setting to work